Ray Direct Connection

Connect PeekSmith 3 directly to Ray for magnetic detection and orientation sensing without using your phone.

How It Works

Ray detects magnets and senses orientation changes. When connected to PeekSmith 3 directly, you’ll see real-time feedback on screen when Ray detects a magnet or changes position.

Connecting to Ray

Implemented in firmware 1.8.x and later.

1. Disconnect all mobile apps - Ensure neither Ray nor PeekSmith 3 is connected to or paired with any smartphone applications.
2. Update PeekSmith 3 to latest firmware.
3. Press and hold front right button on PeekSmith 3.
4. Shake and turn Ray to wake it up.
5. PeekSmith 3 scans for 20-25 seconds (press right button to stop early).
6. Once connected, magnet detection displays on screen.

Configuration

In PeekSmith 3 standalone settings, you can configure:

Ray Detect Orientation — Auto-detect Ray facing direction.

Ray Vibrate On Magnet — PeekSmith vibrates when Ray detects magnet.

Ray Sensitivity — Adjust magnetic detection sensitivity.

Connection Requirements

Before attempting to connect Ray:

• Firmware: Ensure PeekSmith 3 has the latest firmware (v1.8.x or later)
• App Disconnected: Close the PeekSmith app and ensure PeekSmith 3 is not connected to any mobile applications
• Ray Disconnected: Make sure Ray is not connected to any other apps or devices
• Wake Ray: Shake and turn Ray to wake it up before connecting
• Distance: Keep Ray and PeekSmith 3 within close proximity (1-2 meters)

Troubleshooting

Ray won’t connect:

• Verify both Ray and PeekSmith 3 are disconnected from mobile apps
• Ensure PeekSmith 3 firmware is v1.8.x or later
• Wake up Ray by shaking and turning it
• Check that both devices are within Bluetooth range

No magnet detection:

• Check Ray sensitivity settings in PeekSmith 3
• Ensure Ray is properly paired and connected
• Verify Ray battery level is sufficient

Video

Learn More

For complete Ray documentation, see Ray documentation.

Get Ray

Buy Ray